Dear customer, here you will find instructions on how to mount your bookshelf on the wall.

Place the wall mount horizontally on the wall, please use a "level". Place the lower left corner of the wall hanging 11 cm lower and 3 cm to the right of the desired highest left corner of your bookcase. Please see the illustration. In this way, you can easily measure where to place the wall hanger before you hang your shelves on the wall.

Begin by turning the adjustable metal washer at each end of the wall plug (use a flat screwdriver) so the +/- indicator faces 12 o'clock. Place the wall mount horizontally on the wall. Mark for drilling in the two adjustable holes. Drill and put screws in the two holes. Place the wall mount on the two screws, making sure it is horizontal. If it is not satisfactorily leveled, adjust the level by turning the adjustable metal disc. When you have adjusted one or perhaps both sides of the wall mount - make an additional hole in the wall that matches the pre-drilled holes in the center of the wall mount - this way you have an extra strong and stable wall Installation

In your packaging you will find two adjustment devices. These adjustment elements make it possible to level your bookcase vertically if your wall is slightly uneven. Use them by removing the tape and placing them in each of the bottom corners of the back of your bookcase. Turn the metal washers counterclockwise to align between the wall and the shelf