WALL MOUNTING
Dear Customer please find instructions on how to wall mount your Bookcase.
Place the wall-connection horizontal on the wall please use a “Spirit level”. Place the left lower corner of the wall-connection 11 cm lower and 3 cm to the right, from the desired highest left corner on your bookcase. Please see illustration. This way you can easily measure where to place the wall-connection units before hanging you bookcases on the wall.
Start by turning the adjustable metal slice in each end of the wall connector (use a flat screwdriver), so the +/- Indicator Is facing 12 o’clock. Place the wall connector level on the wall. Mark for drilling in the two adjustable holes. Drill and place screws in the two holes / wallplugs. Place the wall connector on the two screws and make sure its level. If it is not satisfactory leveled please adjust the levelness by turning the adjustable metal slice. Once you have adjusted one or maybe both sides of the wall connector - make additional hole in the wall to match the predrilled holes in the center of the wall connector - this way you have an extraordinarily strong and stable wall Installation
Within your packaging you find two adjusters. These adjusters enabling leveling of your bookcase vertically if your wall is a bit uneven. Use by removing the tape & place them in each of the lower corners on the back of your bookcase. Turn the metal slice counterclockwise to adjust between the wall and the bookcase